Description
Storage Charger and Discharger with OLED Display
VIFLY WhoopStor is the first 1S whoop battery charger with storage. Besides charging the battery to
full voltage, it can start the charger or discharger automatically to get your battery into storage voltage.
The charging status is displayed clearly on the OLED screen like the battery voltage, charge current, etc.
Type-C, XT60 and DC Input
VIFLY WhoopStor supports Type-C, XT60 and DC power input. Type-C used PD and QC
protocol that supports fast charge at 9V and 12V, but it not supports regular 5V USB charge.
Regular and HV Battery Supported
VIFLY WhoopStor 1S charger supports both regular battery at 4.2V and high voltage battery at 4.35V. You can switch it easily with the button.
Heat Sink to Cool the Unit
The big heat sink below the PCB board would effectively dissipate the heat to
prevent the unit from overheating when charging or discharging.
Input connector: XT60, DC(5.5*2.1mm)
USB-C(PD3.0, QC2.0, BC1.2)
Input voltage range: 7V-21V (XT60 2S-5S Battery, DC)
9V / 12V (USB-C)
Minimum input power: 30W
Max charging current: 0.9A/port
Support battery connector: PH2.0 & BT2.0
Battery type: LiHV 4.35V (±0.05V) / LiPO 4.2V(±0.05V)
Storage voltage: 3.85V(±0.05V)
Max discharge power: 1W/port
Parameters
Cell count | 1 |
Dimensions (Length * Width * Height) | 101x49x22 mm |
Charge current | 0,9 Amper |
Input connector | XT60, DC(5.5*2.1mm) |
USB-C(PD3.0, QC2.0, BC1.2) | |
Input voltage range | 7V-21V (XT60 2S-5S Battery, DC) |
9V / 12V (USB-C) | |
Minimum input power | 30W |
Max charging current | 0.9A/port |
Support battery connector | PH2.0 & BT2.0 |
Battery type | LiHV 4.35V (±0.05V) / LiPO 4.2V(±0.05V) |
Storage voltage | 3.85V(±0.05V) |
Max discharge power | 1W/port |
Package included
Reviews







The best 1S charger!