Weboldalunk használatával jóváhagyja a cookie-k használatát a Cookie-kkal kapcsolatos irányelv értelmében.
Menu

Diatone MAMBA Stack F722 MK3 60A 6S 32bit

Price:
123.50 EUR
Manufacturer:
Model: DIAT_JH60373
Qty:pc

Description

Fixed

  • Add I2C function
  • When you connect the USB, the receiver and OSD settings can be saved
  • Increase the pad area
  • LED signal selection (when Mamba Led sys avaiable)
  • BEC short circuit protection
  • TVS instant high voltage protection 30V

Update

  • Upgrade the anti-interference cable
  • Use Typec(Most)
  • The pad area of the Mini flight controller (20×20) increased by 140%

Added

  • Add self-recovery insurance to the receiver's 5V power supply.
  • Increase the camera VCC power supply pad.
  • The standard flight controller (30.5×30.5) adds a spare pad.
  • Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference.

FC Specifications
MAMBA Basic F722MK3
MCU: 216MHz STM32F722RET6
GYRO: MPU6000
Barometer: Yes
OSD: Yes
Blackbox: 16M Flash Memory
Uarts: 6Set
ESC Soft: Dshot300/600
ESC Telemetry: Yes
Power Led: Yes
LED Controller:BF LED/MB LED(4 Set 2812 LED)
S/F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 3~6S Lipo (12.6~25.2V)
TVS Protection: Yes
BEC:3.3V 0.5A& 5V 3A (ystem Power)& 5V 3A(LED)& 9V 3A
MOUNTING: 30.5mm, M3

ESC Specifications
MAMBA F60_BL32
INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
CONTINUE CURRENT:60A×4
BURST CURRENT:75A (10S)
BEC: No
Target:BLHeli_32 MAMBA F60_BL32
SOFT: Dshot300/600/1200
TVS Protection: Yes
MOUNTING: 30.5mm/M3

Parameters

ESC firmware BLHeli 32
Black box internal 16MB
FC CPU STM32F722 RET6
OSD yes
UARTS 6
Mounting pattern 30,5x30,5 mm (mini)
IMU MPU6000
Steady current 60 A
voltage 3-6 cell (11.1V-22.2V)
Weight 31 g

Package included

1 x High-Frequency 470uF/35V
2 x 8pin sh1.0
2 x 12AWG 100mm
AMASS Original XT60

Reviews

There are no reviews for this product.
Write a review!