Description
The Blade frame is designed and manufactured by the CCarbon workshop for racing and freestyle flights due to its light weight.
The frame is produced in-house from 3K carbon sheets with flat-bed CNC milling technology.
One of the great advantages of domestic production is that the necessary parts can be procured within 1-2 days.
The frame is designed and built for 20*20 flight and motor control.
The first frame of the CCarbon workshop, which was prepared to receive a Walksnail VTX unit!
Only 14 mm wide can be installed from the camera.
The frame comes with a fin and a micro Lollipop antenna holder.
Assembled Features:
Design: True-X or Stretch-X
Length: 120 / 135 mm
Width: 115 / 116 mm
Base height: 34 / 29 mm (without fins)
Motor-motor distance: 105-105 / 90-120 mm
For diagonal axis: 150 mm
Acceptable motor diagonal: 9-12 mm
Height of spacers: 20 or 25 mm
Arm thickness: 3 mm
Bottom, mid and top plate thickness: 1.5 mm
The assembled weight of the frame without TPU parts: 31 g
The weight of the basic TPU parts for the frames is approximately: 5 g
Recommended propeller size: 3"
Parameters
Dimensions (Length * Width * Height) | 120x115 mm |
Mounting pattern | 20x20 mm (micro) |
stílus | race |
Weight | 36 g |
Váz formája | True X |
Reviews
3 inchesnek írjak, de röhögve elfér rajta 3.5 inches propeller is amit két különböző propellerrel teszteltem (kb. 1mm-re van a propeller a váztól ami sok is).
Azt nem írták, de 25.5mm AIO-t is lehet belerakni.
Jelenleg 20mm-es stack van benne így egy kicsit szűkös lett :'D
Elég jó vételnek tartom.
I can't say a bad word about it because I also got PEZ. :D
I'd write it as 3 inches, but it can fit a 3.5 inch propeller, which I tested with two different propellers (the propeller is about 1mm away from the frame, which is a lot).
It wasn't written that way, but you can also put a 25.5mm AIO in it.
It currently has a 20mm stack in it, so it's a bit tight :'D
I think it's a pretty good buy.